Electric Handle Heating - Stihl MS 260 Manual De Instrucciones

Ocultar thumbs Ver también para MS 260:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Fitthecarburetor boxcover and secure
itwiththetwist l ock:
Preheated airfrom around thecylinder is
now drawn inalong withcold air - this
helps prevent carburetor icing.
At temperatures
below -10°C
It is advisable to fit the intake air
preheating kit* if you use your saw in
extremely cold conditions (temperatures
below -10°C, in powder or drifting snow).
When fitted, the kit ensures that only
heated air is drawn in from around the
cylinder, It prevents air filter and
carburetor icing,
The shutter for carburetor preheating
must be in the "winter" position when the
intake air preheating kit is fitted.
If your saw is very cold (frost or ice on
machine), start the engine and keep it at
a high idle speed (with chain brake
disengaged) until it reaches normal
operating temperature.
The air filter may toad up faster when
you use intake air preheating - clean it
more frequently.
In the event of engine running problems,
first check that conditions for use of
intake air preheating still apply.
Electric Handle
Heating*
English / USA
Switching on electric handle heating*
Move switch on front handle to I -
move switch back to 0 to switch off
the heating.
There is no risk of overheating during
long periods of operation. The whole
heating system is maintenance-free.
*
see "Guide to Using this Manual"
MS 260
*
see "Guide to Using this Manual"
37

Capítulos

Tabla de contenido
loading

Tabla de contenido