Connections
or
To USB memory/
To iPod
Portable audio player
compatible video
• Set the system switch to "NORM" when only a changer is connected (when the Ai-NET compatible equalizer is not used). When the IMPRINT
audio processor is connected, set to EQ/DIV position.
* The two system switches are located on the bottom of the unit.
(Yellow)
CAMERA IN
(Yellow)
REMOTE OUT
(White/Brown)
REMOTE IN
(White/Brown)
REVERSE
(Orange/White)
M.CONT
(White/Pink)
REMOTE TURN-ON
(Blue/White)
POWER ANT
(Blue)
AUDIO INTERRUPT IN
(Pink/Black)
PARKING BRAKE
(Yellow/Blue)
FOOT BRAKE
(Yellow/Black)
IGNITION
(Red)
BATTERY
(Yellow)
GND
(Black)
SPEAKER
SPEAKER
LEFT
LEFT
(Green)
(White/
REAR
FRONT
(Green/
Black)
(White)
Black)
Speakers
Front left
Rear left
To S Video Output terminal
To Video Output terminal
(Red)
(White)
To Audio Output terminals
(Yellow)
To Video Input terminal
(Red)
To Audio Input terminals
(White)
To back-up camera
To remote input lead
To remote output lead
To plus side of the back
lamp signal lead of the car
To monitor control lead
To steering remote control
interface box
Amplifier
Amplifier
Amplifier
CD Changer
(Sold Separately)
To amplifier or
equalizer
To power antenna
To vehicle phone
To the parking brake
signal lead
To the foot brake cord
or brake lamp cord
Ignition key
SPEAKER
SPEAKER
RIGHT
RIGHT
(Violet/
(Gray)
REAR
FRONT
Black)
(Gray/
(Violet)
Black)
Rear right
Front right
Antenna
(R, L)
(R, L)
Rear Left
Rear Right
Front Left
Front Right
Subwoofers
To iPod
Battery
87
-EN