Install The Boundary Wire; To Bury The Boundary Wire; To Attach The Boundary Wire To An Existing Fence - Petsafe HIG11-13655 Manual De Adiestramiento Y Funcionamiento

Install the Boundary Wire

Step
7

To Bury the Boundary Wire

Burying the Boundary Wire is recommended to protect it and prevent disabling the system.
1. Cut a trench 1-3 inches deep along your planned boundary.
2. Place the Boundary Wire into the trench maintaining some slack to allow it to expand
and contract with temperature variations.
3. Use a blunt tool such as a wooden paint stick to push the Boundary Wire into the trench.
Be careful not to damage the Boundary Wire.
To Attach the Boundary
Wire to an Existing Fence
The Boundary Wire of the PetSafe
Ground Fence
fence, split rail fence, or a wooden privacy fence.
The Boundary Wire can be attached as high as
needed. However, make sure the Boundary Width
is set at a high enough range for the pet to receive
the signal. If using a Double Loop with an existing
fence at least five feet tall, run the Boundary Wire
on top of the fence and return it on the bottom of
the fence to get the three to five foot separation
needed.
• Chain Link Fence (7A): Weave Boundary Wire
through the links or use plastic quick ties.
• Wooden Split Rail or Privacy Fence (7A):
Use staples to attach Boundary Wire. Avoid
puncturing the insulation of the Boundary Wire.
• Double Loop with an Existing Fence: Run the
Boundary Wire on top of the fence and return it
on the bottom of the fence to get the three to
five foot separation needed.
• Gate (Single Loop) (7B): Bury the Boundary Wire
in the ground across the gate opening. Note:
The signal is still active across the gate. Your pet
cannot pass through an open gate.
• Gate (Double Loop) (7B): Bury both Boundary
Wires across the gate opening while keeping
them at least five feet apart.
18
Before you begin installing the Boundary Wire, unplug the Fence Transmitter
power adapter from the outlet.
®
can be attached to a chain link
™
1-800-732-2677
Basic In-
7B
7A