Position The Boundary Wire - Petsafe HIG11-13655 Manual De Adiestramiento Y Funcionamiento

2F
Sample 3 (2F): Front or
Back Yard Only
(Double Loop)
From the Fence
Transmitter, run the wire to
A, A to B, B to C, C to D, D
to E, E to F, make a U-turn
and follow your path all
the way back to A, keeping
the wire separated at least
5 feet. Twist the wire from
A back to the Fence
Transmitter.
Sample 6 (2J): Wire Loop Attached to Existing Fence
(Double Loop)
This layout allows you to include your existing fence as part of
your layout and keep your pet from jumping out or digging
under your existing fence. It reduces the amount of wire which
will need to be buried. Run the wire from the Fence Transmitter
to A, A to B, B to C, C to D, D to E, E to F, make a U-turn and
follow your path all the way back to A, keeping the wire
separated at least 5 feet. Twist the wire from A back to the
Fence Transmitter. See the "Install the Boundary Wire" section
for more information on attaching the wire to a fence.

Position the Boundary Wire

Step
3
Lay out the Boundary Wire using your planned boundary and test the system BEFORE
burying the wire or attaching it to an existing fence. This will make any layout changes
easier. Work carefully. A nick in the wire insulation can diminish the signal strength and
create a weak area where your pet can escape.
Running the Boundary Wire parallel to and within
10 feet of electrical wires, neighboring containment
systems, telephone wires, television or antenna cables,
or satellite dishes may cause an inconsistent signal. If
you must cross any of these, do so at 90-degree angles
(perpendicularly) (3A).
If separating your Boundary Wire by at least 10 feet
from a neighboring containment system's wire does not
reduce the inconsistent signal, contact the Customer
Care Center at 1-800-732-2677.
2G
Sample 4 (2G): Front
Boundary Only
(Double Loop)
From the Fence
Transmitter, run the
wire to A, A to B, B
back to A keeping the
wire separated at least
5 feet. Twist the wire
from A back to the
Fence Transmitter.
www.petsafe.net
2H
Sample 5 (2H): Lake Access
(Double Loop)
From the Fence Transmitter,
run the wire to A, A to B,
make a U-turn and go to C,
C to D, D to E, make a U-turn
and follow your path all the
way back to A keeping wire
separated at least 5 feet.
Twist the wire from A back
to the Fence Transmitter.
2J
3A
11