Safety Rules; General - Promax AE-966 Manual De Instrucciones

2

SAFETY RULES

2.1

General

*
The safety can turn compromised if there are not aplied the instructions given in
this manual.
*
To use the equipment only in system or devices with the negative of
measurement connected to the potential of land.
*
This is a class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
*
This equipment can be used in Over-Voltage Category II installations and
Pollution Degree 2 environment. (2.2).
*
When using some of the following accessories use only the specified ones to
ensure safety:
Power cord
Battery (Optional)
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 70 V DC or 33 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions.
*
The user is only authorized to carry out the following maintenance operations:
Replace the battery pack of the specified type and value.
On the Maintenance paragraph the proper instruction are given.
Any other change on the equipment should be carried out by qualified personnel.
*
The negative of measure is at ground potential.
*
Do not obstruct the ventilation system.
*
Use for the signal inputs/outputs, specially when working with high levels,
appropriate low radiation cables.
*
Follow the cleaning instructions described in the Maintenance paragraph.
Page 6
USER'S MANUAL AE-966 / 967
04/2016