Safety Rules - Promax MZ-805 Manual De Instrucciones

MZ-805 L/C/R meter

2 SAFETY RULES

2.1 Generals
* Use this equipment connected only to devices or systems with their
common at ground potential or insulated from the mains.
* This is a class I equipment, for safety reasons plug it to a supply line with
the corresponding ground terminal.
* This equipment can be used in Over-Voltage Category II installations and
Pollution Degree 2 environments (see 2.2).
* When using some of the following accessories use only the specified
ones to ensure safety:
Power cord
* Observe all specified ratings both of supply and measurement.
* Remember that voltages higher than 60V DC or 30V AC rms are
dangerous.
* Use this instrument under the specified environmental conditions.
* The user is only authorized to carry out the following maintenance
operations:
Replace the mains fuse of the specified type and value.
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by qualified
personnel.
* The negative of measure is at ground potential.
* Do not obstruct the ventilation system.
* Follow the cleaning instructions described in the Maintenance paragraph.
August 2002 Page 5