Promax AE-966 Manual De Instrucciones página 353

meas:refl:exg
meas:refl:corr:edit
meas:refl:corr:edit:del
meas:refl:corr:edit:delall
meas:refl:corr:edit:quit
meas:refl:corr:no?
meas:refl:corr:on?
meas:refl:corr:on
meas:refl:corr:off
meas:inputz?
meas:inputz
meas:inputz:cal?
meas:inputz:cal
Page 162
Sets the external gain/loss in dB
Example: meas:refl:exg _-6 (-6dB)
Sets the amplitude correction data (frequency, amplitude).
Need to specify the table index and the number of
correction.
Example: meas:refl:corr:edit_1_CR_2,100,-40,150,-30
(table index1, 2 data, 100MHz /-40dB, 150MHz /-30dB)
Deletes an amplitude correction point. Need to specify set
index and point index.
Example: meas:refl:corr:edit:del_5_30 (delete set 5,
point 30)
Deletes all point in an amplitude correction set. Need to
specify set index.
Example: meas:refl:corr:edit:delall_5 (delete set No.5)
Quits the amplitude correction mode.
Returns the activated amplitude correction set.
Parameter: ninguno, 1 ~ 5 (grupo de corrección)
Returns the amplitude correction set is active or inactive.
Need to specify the set index.
Parameter: on, off
Example: meas:refl:corr:on_1? (¿set No.1 is activated?)
Activates the amplitude correction set. Specify the set
index.
Example: meas:refl:corr:on_1 (activate set No.1)
Deactivates the amplitude correction set. Specify set
index.
Example: meas:refl:corr:off_1 (deactivate set No.1)
Returns the input impedance.
Parameter: 50, 75
Sets the input impedance. Parameter: 50, 75
Example: meas:inputz_50 (50Ω)
Returns the input impedance calibration value in dB.
Sets the input impedance calibration value in dB.
Example: meas:inputz:cal_5.9 (5.9dB)
USER'S MANUAL AE-966 / 967
04/2016