Tabla de contenido
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
To define the pulley to be used on the motor, proceed in the following matter: diameter of pulley multiplied
by shredder rotation and divided by the specified rotation on the motor plate.
Formula:
Example: if the motor is 2 poles (3,600 rpm)
110 x 3,300 (TRF-800)
Model
Fine flakes
TRF 600/650
80/120
TRF 700/750
120/170
TRF 700F
TRF 800/850
180/220
Notes: 1) Coarse chunks is the result of grinding corn on the cub.
2) The production stated above is for references. It may varies depending on humidity of the product or the
working conditions.
Disc shaft pulley diameter x disc rotation -> (chart above)
330.000
=
3,600
3,600
Production Characteristics
0.8
3
Fine broken
grain
350/550
550/700
750/950
ATTENTION!
!
TRAPP ORIGINAL
PARTS.
TRAPP does not undertake
responsibility for eventual
damages caused to the
equipment, neither for
accidents that may occur due
to the use of non-original parts.
Motor rotation
= 100 mm (Engine oulley diameter)
Strainer (mm)
5
Production (kg/h)
Broken grain
Coarse chunks
500/900
600/1,000
900/1,150
Use
12
Flat
Green crop
600/900
1,000/2,000
800/1,100
2,000/3,100
900/1,200
3,200/4,200
49
Tabla de contenido
