Rapid Dial Keys; Call Waiting; Three-Way Conferencing - Intelbras TIP 200 LITE Guia De Instalacion

To place the IP telephone on speakerphone without first dialing a number, press
and then dial the desired number.
For an incoming call, press
To end the call, press
Or
To use the handset, pick it up, and the speakerphone will automatically be turned off.

6.7. Rapid dial keys

To store the functions for the DSS keys (from 1 to 6), use the following procedure:
1. Press Menu and, using the
2. Using the
3. Using the
and press
4. Using the

6.8. Call waiting

If you are on a call (call 1) and the IP telephone receives an incoming call (call 2),
you will hear a warning beep and the LCD will show that there is an incoming call.
In order to answer the incoming call, follow the procedure below:
1. Press the
2. To return to call 1 and leave call 2 on hold, use the
the Hold key.
Note: consult with your VoIP operator about availability, and if the IP telephone
has the correct settings configured.

6.9. Three-way conferencing

While on a call, follow the procedures below:
1. Press Conference and then dial the number of the phone you wish to include
in the conference;
2. When this call is answered, any time you want to start a conference, press
Conference again and a conference for three will be established;
3. To exit the conference call, hang up.
Note: consult your VoIP operator about availability.
48
to answer it using the speakerphone.
and the icon
keys, select DSS keys and press
keys, select which DSS key (from 1 to 6) you wish to configure
;
keys, select the options you wish to use for that key and press
key to put call 1 on hold and answer the incoming call;
will disappear.
keys, select Features and press
;
;
.
keys and then press