Intelbras TIP 200 LITE Guia De Instalacion página 43

Setup via the device
1. Press Menu and, using the navigation keys
2. Using the navigation keys,
3. Input your password using the alphanumeric keypad (factory default: admin)
and press
4. Using the navigation keys,
5. Using the navigation keys,
and press
6. Using the navigation keys,
7. Using the navigation keys,
such as the name to be displayed on the screen, identification name to be
displayed on the destination phone, registry name of the SIP server, user name
provided by the SIP server, SIP account password, and server;
8. Input the values for each option using the alphanumeric keypad and press
to save.
Configuration via an internet browser
IP address verification
In order to access the device configuration page, verify the IP address using the
following steps:
» DHCP mode/static IP
1. Press ;
2. Verify the IP number shown on the screen.
» PPPoE mode
When the IP telephone is configured in the PPPoE mode, the user must be con-
nected to the LAN port of the device in order to be able to access the configuration
page. Check the LAN network address according to the following procedure:
1. Press ;
2. Using the navigation keys,
3. Using the navigation keys,
4. Check the IP number under item LAN IP
;
;
select Settings and press
select Advanced and press
select Accounts and press
select the account to be activated (1 or 2)
select the Enable option;
select one of the 12 options you wish to setup,
select More... and press
select Network and press
using the navigation keys.
;
;
;
;
;
43