DENTAURUM amda Instrucciones De Uso página 22

Then, put amda
them in the palatal sheaths on the molar bands. Loosen the posterior
screws of the amda
on the tomas -pins EP. Move the palatal arch towards anterior until
®
the eyelets of the tomas
heads of the tomas
amda telescopes.
®
We recommend covering the tomas
with a light-curing adhesive, so that these elements are firmly attached to
the amda palatal arch.
®
5.1.4.2 Activating amda
Activate amda
®
the anterior stop screws on the amda
easier. Depending on the desired initial force (see Fig. 6), move the anterior
stop screw with the inner telescopic tube using mosquito forceps towards
posterior and tighten the screw. Then, loosen the posterior stop screw
and remove the mosquito forceps. This step creates the distalization force
and activates the first side.
Repeat this procedure for the other side. If needed, you can adjust a
different amount in force on each side.
Fig. 6: Force-travel diagram of an amda
22
back in. Start with the amda
®
telescopes. Then, place the tomas
®
-abutments EP sit tightly below the fungiform
®
-pins EP. Tighten the posterior screws of the
®
®
one side at a time. Position mosquito forceps in front of
®
-pins EP and the tomas
®
palatal arch. This makes activation
®
telescope
®
connectors and insert
-abutments EP
®
-abutments EP
®