Quick Start Guide - Empi Phoenix Manual De Usuario

16. Quick Start Guide

Read full instructions before using the device.
1
Insert batteries into the device and replace the battery cover.
.
Place electrodes or garment following healthcare provider's instructions. Insert the wire
2.
from the garment (if using the garment) or electrode leadwire (if not using the garment)
by pressing the attachment into the port on the device.
Turn the device on by pressing the
3.
Select the therapy (P1 Disuse Atrophy, P2 Reinforcement, P3 TENS or P4 Edema)
4.
prescribed by your clinician by pressing the
Adjust intensity to desired level by pressing the
5.
2. You must select your program before turning up the intensity. Once the intensity is
increased, the program will be locked.
P1 and P2 begin with a two-minute Warm-Up phase, which will count down on the
NOTE:
screen. The Warm-Up phase will cause your muscles to twitch but not contract. Set the
device intensity to a comfortable level during Warm Up.
Once the Work Phase begins you can adjust the intensity further. P1 and P2 finish with a
Cool Down phase. Refer to the Section 6.1 of this manual for a full explanation of these
programs.
Phoenix User's Manual
button.
or button.
and buttons for channels 1 and
39