Guidance And Manufacturer's Declaration - Electromagnetic Emissions - Empi Phoenix Manual De Usuario

14. Guidance and Manufacturer's Declaration –
Electromagnetic Emissions
• The Empi Phoenix device needs special EMC precautions and must be installed and started according to the EMC
information supplied in this manual.
• Portable and mobile RF communications equipment could affect the Empi Phoenix device. For example mobile phones
can affect the Empi Phoenix device. Avoid placing a mobile phone is direct proximity to the Empi Phoenix device.
• Warning: The use of accessories, other than those recommended by the manufacturer, may result in stronger emissions
or reduce the immunity of the Empi Phoenix device.
• Warning: The Empi Phoenix device should not be used beside or stacked on top of any other equipment. If you must use
it side by side or on top of another system, you should check that the Empi Phoenix device works properly in the chosen
configuration.
• Meeting the emissions levels shown in the first table is considered to be essential performance of the Empi Phoenix
device.
Empi Phoenix is intended for use in the electromagnetic environment specified below. The customer or user of the Empi
Phoenix should assure that it is used in such an environment
Emissions test Compliance
RF emissions
Group 1
CISPR 11
RF emissions
Class B
CISPR 11
applicable,
Harmonic emissions
IEC 61000-3-2
powered
Voltage fluctuations/ applicable,
emission oscillations
IEC 61000-3-3 powered
34
GUIDANCE AND MANUFACTURER'S DECLARATION –
ELECTROMAGNETIC EMISSIONS
The Empi Phoenix uses RF energy only for its internal function. Therefore, its RF
emissions are very low and are not likely to cause any interference in nearby
electronic equipment.
Empi Phoenix is suitable for use in any establishment, other than a private dwelling
or a place connected directly to the low voltage mains supply which powers
residential buildings.
Not
battery
Not
battery
Electromagnetic environment - guide
Phoenix User's Manual