Normal Stopping And Emergency Stop Procedures; Warnings - Carlo De Giorgi 2900 Manual De Instrucciones

LABORATORY MICROMOTOR
Start the handpiece motor by means of footpedal (2) for bench top
models or pedal control (9) for floor models.
When the tool is stationary the direction of rotation can be inverted by
means of reverse selector (6); when reverse mode is selected amber LED
(10) will illuminate.
The tool speed can be set in relation to the type of work by means of slide
control (7) on bench top models, or pedal control (9) on floor models.
Furthermore, bench top models 3000 and 5000 are equipped with a
display (8) showing motor speed in rpm (x 100).
B
E
5.2.2 – Normal stopping and emergency stop procedures
The motor can be stopped as follows:
- by releasing footpedal (2) (or control (9) for floor models);
- by setting main power switch (1) to OFF, thereby disconnecting
electrical power to the power supply unit;
- by unplugging the power cable from the electrical socket outlet.

5.2.3 - Warnings

In relation to the material being machined, the user must adopt personal
protection devices (facemask, gloves, etc.) and/or an efficient exhauster
system.
Carlo de Giorgi
A
D
C
13
14
Fig. 3
GB - 9