Operator Instructions; Controls; Instructions For Use; Normal Stopping And Emergency Stop Procedures - Carlo De Giorgi F 80 NEW Manual De Instrucciones De Uso Y Mantenimimento

5 - OPERATOR INSTRUCTIONS

5.1 - CONTROLS

The motor is stopped and started by pressing a pedal-operated rheostat,
which also provides tool rotation speed control.

5.2 - INSTRUCTIONS FOR USE

5.2.1 - Normal stopping and emergency stop procedures

The motor can be stopped as follows:
- by releasing the pedal rheostat;
- by unplugging the power cable from the electrical socket outlet.

5.2.2 - Warnings

In relation to the material being machined, the user must adopt personal
protection devices (facemask, gloves, etc.) and/or an efficient exhauster
system.
DO NOT ABANDON THE APPLIANCE WHILE IT IS RUNNING AND
REMEMBER TO DISCONNECT IT FROM THE POWER SUPPLY WHEN
YOU FINISH WORKING WITH IT AND FOLLOWING ALL STOPPAGES,
IRRESPECTIVE OF THE MOTIVE.
IF YOU NOTICE
IMMEDIATELY AND DISCONNECT IT FROM THE ELECTRICAL
POWER SUPPLY. BEFORE RECONNECTING THE POWER SUPPLY
FIND THE CAUSE OF THE FAULT AND REMEDY IT. IN THE CASE OF
PROBLEMS, CONSULT CARLO DE GIORGI.
GB - 10
MALFUNCTIONS
PENDANT MOTORS
STOP THE APPLIANCE
Carlo de Giorgi