Kohler K-11748-K Guía De Instalación Y Cuidado página 22

Instale la pared acabada (cont.)
Instale el material de acabado de la pared.
Deje el protector de yeso en su lugar en este momento.
Install the Finished Wall
Thin Wall
Plaster Guard
Renfort en plâtre
Protector de yeso
Discard.
Jeter.
Deseche.
1-9/16"
(40 mm)
45˚
1-9/16"
(40 mm)
Ø 4-1/2"
(114 mm)
Twist the dome of the plaster guard to separate it from the outer ring. Discard the
outer ring.
Slide the dome over the valve stem.
NOTE: The plaster guard dome can be used as a guide for marking the cutout.
Cut a 4" (102 mm) hole in the wall material.
For Valves with Stops Only: Using the holes in the valve backing plate as a
guide, cut openings for the stops.
Secure the wall material to the valve backing plate at the locations shown.
Leave the plaster guard in place at this time.
1128093-2-D
Ø 3-1/2" (89 mm)
Plaster Guard
Renfort en plâtre
Protector de yeso
2-3/4" (70 mm)
Rough-In Depth
Profondeur de raccordement
Profundidad de instalación
45˚
Screws Ø 4-1/2"
Vis
(114 mm)
Tornillos
22
Wall Material
Matériau
du mur
Material de
la pared
Drywall Screws
Cloisons sèches
Tornillos para
paneles de yeso
Kohler Co.