cleanIng InstructIons
tHe ImmersIon Blender must Be cleaned and drIed
accordIng to tHe folloWIng InstructIons after
eacH use.
• Disconnect from mains supply.
• Wash, rinse, and sanitise the stainless steel portion of the immersion blender
prior to initial use, after each use, or whenever it will not be used again
within a short period.
• Clean and sanitise the plastic motor housing prior to initial use and after
each use. Do not immerse the motor housing. Clean with a sponge or cloth.
• Washing solutions based on non-sudsing detergents, and chlorine-based
sanitising solutions having a minimum chloride concentration of 100 PPM
are recommended.
The following washing, rinsing, and sanitising solutions, or their equivalents,
may be used.
solutIon product
Washing
Ajax
Cleaner Powder
Rinsing
Plain Water
Sanitising
Clorox
Institutional Bleach
* Ajax
is a registered trademark owned by the Colgate Palmolive Company.
®
* Clorox
is a registered trademark owned by the Clorox Company.
®
• In repetitive use applications, frequent cleaning will prolong life.
6
for food service applications
dIlutIon
In Water
Sanitizer
¼ oz./2½ gallons Hot 115°F (46°C)
®
1 Tbl./Gallon
®
temperature
Warm 95°F (35°C)
Cold 50-70°F (10°-21°C)