Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RESETTING THERMAL PROTECTION
• Your blender is equipped with a manual reset switch to protect the
motor from overheating.
• If your blender stops running under heavy use, flip the toggle
switch OFF (O) and unplug the power cord. Empty the blender jar
of all its contents and allow approximately 5 to 10 minutes for
the motor to cool down.
• Plug the power cord back into the outlet and continue blending.
• If your blender does not function properly following this
procedure, discontinue use and contact a certified Waring
Customer Service Center.
CLEANING AND SANITIZING INSTRUCTIONS
THE CONTAINER MUST BE CLEANED AND DRIED AFTER EACH
USE OF THE BLENDER ACCORDING TO THE FOLLOWING
INSTRUCTIONS.
FAILURE TO DO SO MAY ALLOW RESIDUE OF PROCESSED
MATERIAL TO COLLECT ON THE INTERNAL SEALS OF THE BLADE
ASSEMBLY, RENDERING THEM INEFFECTIVE.
• Wash, rinse, sanitize and dry container prior to initial use and
whenever it will not be used again within a period of 1 hour.
• Wash and rinse container and blade assembly after each use.
• Clean and sanitize motor base prior to initial use and after
each use.
• Washing solutions based on non-sudsing detergents and
chlorine-based sanitizing solutions having a minimum chlorine
concentration of 100 PPM are recommended.
The following washing, rinsing, and sanitizing solutions, or their
equivalents, may be used. The sanitizing dilutions are based on
the hypochlorite concentration of the bleach. The dilutions for two
commonly available bleach concentrations are:
• Hypochlorite: 5.25% – 3 teaspoons bleach per gallon of water
• Hypochlorite: 8.25% – 2 teaspoons bleach per gallon of water
In repetitive batch-processing applications, frequent cleaning of
the container will prolong the life of the blade assembly. In no case
should actual running time between cleanings exceed one-half hour.
Do not use container to store processed foods or beverages.
7
Tabla de contenido
