Dust Extraction - Festool CARVEX PSC 420 EB Manual De Instrucciones

3 4
1. 1.

Dust extraction

WARNING
Dust hazard

Dust can be hazardous to health. Always work
with a dust extractor.

Always read applicable national regulations be-
fore extracting hazardous dust.
4
5
12
3-2 4-2
3-1 4-1
ca. ca.
3 mm 3 mm
2. 2.
4-2
5-2
4-1
5-1
The extraction adapter [4-3] allows jigsaws to be
connected to a dust extractor (hose diameter 27
mm).

Insert the extraction adapter into the rear open-
ing of the saw table so that the hook [4-2] en-
gages in the [4-1] recess.

To remove the extraction adapter, press the
hook [4-2].
 Due to the low power consumption of the ma-
chine (low energy consumption), dust extractors
with an automatic switch-on function will some-
times only start up when the actual cut is made.

Set the dust extractor to continuous operation
for special applications (e.g. low stroke rate,
soft wood).
Hot and sharp tools
Risk of injury

Do not use insert tools that are blunt or defec-
tive.

Wear protective gloves.
Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
Selecting saw blade
Only use saw blades with a T-shank. The
saw blade should not be longer than that re-
quired for the intended cut. To ensure safe
guidance, during the cut the saw blade should
emerge at the bottom of the workpiece with each
stroke.
4-3
5-3
 Only use cross-set saw blades when using the
angle and adapter table. We recommend Fes-
tool saw blade S 105/4 FSG.
Changing tools
CAUTION