Ignition 123ROVER-8-R-V Instrucciones De Montaje página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 37
TIPS
Do NOT disconnect ANY electric wire, when the engine is running. This is bad practice when using
high-tech electronic systems, such as the 123ignition.
Sparks are much stronger with a 123ignition: use good quality sparkplug leads.
Resistor-core silicone leads are the better choice! Do not use solid core wire, these send out quite
a lot of electromagnetic noise that interferes with electronic devices.
Fresh spark plugs to go with the new coil and wires will ensure optimum ignition performance.
Replace the cap and rotor every 30.000 km. Here is ordering information :
distributor-cap
RTC3197
D-4540
2.8091PHT
DDB175
54 402 069 ( Lucas )
TUNING
In the table presented below, you can see that the 16 curves are divided in four groups of four curves.
Each group has a different maximum advance ( 20, 24, 28 & 32 degrees), and the 4 curves within each
group have different rates of advance.
Assume you want to tune your engine, and you know the maximum advance ( with disconnected
vacuum! ) for this engine is 24 degrees. The first curve you should choose is curve '4', and if that works
well, step to curve '5' for improved throttle response.
:
( orig. Landrover )
( KW )
( Facet )
( Lucas )
distributor-rotor :
RTC3618
( orig. Landrover )
D-5506
( KW )
3.8121
( Facet )
DRB139
( Lucas )
54 402 689 ( Lucas )
UK
loading