Maintenance - Corghi MONSTER AGTT Manual De Uso

Side To Side does not stop or does not work
• Check that the diameter shown on the display corresponds to the rim diameter
• Clean the protective glass on the laser
• If there is an error message on the display contact technical assistance
• Contact Technical Assistance
The demounting movement does not work
• Make sure the tool is in the horizontal position
• Check that the microswitch wire is connected
• If there is an error message on the display contact technical assistance
• Contact Technical Assistance
The disc and tool tangency functions appear to have lost
• Delete the set memory
• Check that the diameter shown on the display corresponds to the rim diameter
• Contact Technical Assistance
When turning on the cold machine, quick translation does not work well.
• heat up the oil for a few minutes by moving the machine at a normal speed�
WARNING
The "Spare parts" handbook does not authorise users to carry out work on the machine
with the exception of those operations expressly described in the user manual. It only
enables users to provide the technical assistance service with precise information in
order to minimise delays.
WARNING
CORGHI declines all liability for claims derived from the use of non-original spare
parts or accessories.
ATTENTION
Unplug the machine from the socket and make sure that all moving parts have been
locked before making any adjustments or maintenance work.
ATTENTION
Do not remove or modify any part of this machine (except for assistance).
ATTENTION
Before removing unions or pipes, make sure that the fluids are not pressurised. If
pressurised oil escapes, it can cause serious injury.
Operator's manual MONSTER AGTT
their calibration

MAINTENANCE

UK
65