For Your Safety; Description/Intended Use; Extreme Operating Conditions - Dräger Panorama Nova S - RP Instrucciones De Uso

Ocultar thumbs

página de 28

/ 28
Contenido
Tabla de contenido

Tabla de contenido

Idiomas disponibles

Panorama Nova S - RP

Full face mask with plug connection

for mask-helmet combinations

The mask-helmet combinations

Panorama Nova S – EPDM – PC – RP

Panorama Nova S – SI – PC – RP

consist of the head protection system

HPS 6100 or

Supra F1 S 12 or Supra F1 SA 12

and the full face mask

Panorama Nova S – EPDM – PC – RP or

Panorama Nova S – SI – PC – RP.

These Instructions for Use apply to the full face mask.

Please refer to the speciﬁc Instructions for Use of the helmet.

For Your Safety

Strictly follow the Instructions for Use: Any use of the full face mask

requires full understanding and strict observation of these instructions. The

full face mask must only be used for the purposes speciﬁed here.

Maintenance: The full mask must be inspected and serviced by experts at

regular intervals and a record kept. Repair and general overhaul of the full

face mask may only be carried out by trained service personnel. We recom-

mend signing a service contract with Dräger Safety to have all maintenance

jobs carried out. Only authentic Dräger spare parts may be used for mainte-

nance. Observe chapter "Maintenance Intervals".

Accessories: Only use accessories listed in the order list.

Liability for proper function or damage: The liability for the proper func-

tion of the full face mask is irrevocably transferred to the owner or operator

if the full face mask is serviced or repaired by personnel not employed or

authorised by Dräger Safety or if it is used in a manner not conforming to its

intended use. Dräger Safety cannot be held responsible for damage

caused by non-compliance with the recommendations given above. The

warranty and liability provisions of the terms and conditions of sale and

delivery of Dräger Safety are similarly not modiﬁed by the above recommen-

dations.

Dräger Safety AG & Co. KGaA

Markings

These Instructions for Use apply to masks with the following type identity

markings:

Panorama Nova S – EPDM – PC – RP

Panorama Nova S – SI – PC – RP

The identiﬁcation markings are externally legible: Panorama Nova S and

EPDM resp. SI on the mask body. PC and F on the mask visor.

RP on the facepiece connector.

CE designation on the mask body: EN 136 CL. 3, Ref. No. 0158

What is what?

7 12

1 Helmet

6 Full face mask

2 Visor

7 Mask body

3 Tensioner grip

8 Facepiece connector 13 Tensioner

4 Nack guard

9 Mask visor

5 Chin strap

10 Steel wire

11 Inner mask

12 Sealing frame

14 Clasp

15 Button

Description/Intended Use

The full face masks listed above are facepieces conforming to

EN 136 CL. 3 and are marked with the CE mark of conformity. In addition,

the full face masks meet the ﬂame engulfment requirements stipulated in

EN 137. They are part of the mask-helmet combination. The full face masks

protect the face and eyes against aggressive media. Special goggles are

available for users who wear spectacles.

The full face mask has two tensioners for fastening to the helmet.

A screen wiper on the inside of the visor, provides plain visibility. The

screen wiper coated in absorbant leather is activated by the operating lever

placed on the outside.

Ambient temperature: –30

C to 120

The plug connection (rapid action coupling) can be used for closed-circuit

breathing apparatus. Only use certiﬁed closed-circuit breathing apparatus!

Use

Put in the closed-circuit breathing apparatus

Put on the helmet

: To ensure a perfect seal of the mask, your forehead

must be entirely bare. If necessary, smooth your hair back from your fore-

head.

Put on the full face mask: A beard or sideburns where the mask ﬁts

against the face will cause leaks! The full face mask should not be used by

people with beards and sideburns. The bow of glasses under the mask

seal also causes leaks. A spectacle frame should be used in such cases.

Place the neck band around your neck. Loosen the chin strap of the hel-

met. Grip both tensioners and push the top edge of the full face mask

under the helmet against your forehead. Tighten both tensioners simultane-

ously by pulling them back at the same time, and then hook them in the ten-

sioner grips on both sides of the helmet. Straighten the mask, and fasten

the chin strap under your chin without overtightening it.

Checking: With the aid of an assistant, check

that the full face mask is correctly ﬁtted. The

tensioners (1) must be tight. If not, adjust the

head netting in the helmet.

1 Remove cap from the plug-in coupling and

press the plug-in coupling into the full face

mask until they engage. Open the cylinder

valve, follow the Instructions for Use of the

closed-circuit breathing apparatus.

Carry out leak test:

2 Tightly squeeze the inspiration hose and

breathe in until a vacuum is produced.

Hold your breath for about 10 seconds. The

suction must be maintained, and no air must enter the mask from outside.

Repeat the leak test two to three times.

Report to operation only with an airtight full face mask!

Leaks reduce the period of use.

CAUTION! If a lamp holder is ﬁtted to the helmet and you bump into an

obstacle, this may cause the mask to leak.

In this case, immediately leave the danger zone.

If the visor shows condensation:

3 Swing the screen wiper with the operation

lever outside at the visor two to three times.

Finally, set the screen wiper in a vertical

position in the middle of the visor.

D D D D o o o o n n n n o o o o t t t t o o o o p p p p e e e e r r r r a a a a t t t t e e e e s s s s c c c c r r r r e e e e e e e e n n n n w w w w i i i i p p p p e e e e r r r r i i i i n n n n d d d d r r r r y y y y c c c c o o o o n n n n d d d d i i i i t t t t i i i i o o o o n n n n . . . .