Puky YOUKE 12 Manual De Instrucciones página 15

ASSEMBLY HANDLEBAR WITH STEM
12'' – 18''
You will need the following tools for assembly YOUKE models und
STEEL / STEEL CLASSIC models
(not part of the scope of delivery)
• 6mm Allen key (YOUKE models)
• 13 mm spanner
(STEEL/ STEEL CLASSIC models)
1. Insert the handlebar into the steer tube. If this
proves to be difficult, unscrew the handlebar a bit
further. Adjust the handlebar to the desired height,
align at right angles to the front wheel and lock it.
ASSEMBLY BRAKE
1. Take the loose end of the brake cable and insert
the wedge into the predefined recess on the brake
handle.
GB
43836_kinderfahrrad_148x210.indd 15 43836_kinderfahrrad_148x210.indd 15
1
2. By pulling the screw at the stem with the aid of a
6 mm Allen key (YOUKE models) or a 13 mm span-
ner (STEEL/ STEEL CLASSIC models) (15 Nm).
1
2. Then, carefully pull the outer cover of the brake
cable to engage the end stop into the adjustment
screw of the brake handle.
2
15 Nm
Please pay attention to the marking of the minimum
insertion depth of the stem shaft. Now reattach the
handlebar padding back onto the handlebar.
When assembling the brake cable, please make
sure that the knurled screw of the brake cable is
situated straight in the holder of the front light. Oth-
erwise, the brakes cannot be assembled correctly.
2
15
09.06.2020 07:50:27 09.06.2020 07:50:27