Dynapac SD1800C Instrucciones De Manejo Y Mantenimiento página 237

KWP SPN FMI
1458 523960 0
1459 523960 1
1460 1180 0
1461 1180 1
1462 1180 0
1463 1180 1
1474 524037 5
1475 84 2
1477 524037 3
1478 524037 4
1479 524062 12
1480 524062 12
1481 524025 5
1482 524044 9
1483 523632 2
1484 524068 2
1485 524052 11
1486 523718 5
1487 523718 12
1488 523718 3
1489 523718 4
1490 4376 5
1491 4376 12
Code Error Identification
7-7-1 Exhaust gas temperature EGR down-
stream; out of range, system reaction ini-
tiated
7-7-1 Exhaust gas temperature EGR down-
stream; out of range, system reaction ini-
tiated
8-1-4 Exhaust gas temperature turbine
upstream; out of range, system reaction
initiated
8-1-4 Exhaust gas temperature turbine
upstream; out of range, system reaction
initiated
5-5-6 Exhaust gas temperature turbine
upstream; out of range, system reaction
initiated
5-5-6 Exhaust gas temperature turbine
upstream; out of range, system reaction
initiated
Ashlamp; open load
5-2-1 Sensor vehicle speed; plausibility error
Ashlamp; short circuit to battery
Ashlamp; short circuit to ground
EAT-system HMI disrupted
EAT-system HMI disrupted
DPF system; operating voltage error
CAN message ComMS_Sys7 not
received from slave
Metering control is not performed in time
error
Master ECU and Slave ECU have been
identified as the same types
MS ECU reported internal error
SCR mainrelay; open load (only CV56B)
SCR mainrelay; powerstage over tem-
perature (only CV56B)
SCR mainrelay; short circuit to battery
(only CV56B)
SCR mainrelay; short circuit to ground
(only CV56B)
6-6-7 SCR reversing valve; open load
6-6-7 SCR reversing valve; over temperature
Short Text Detail
High exhaust gas temperature EGR cooler
downstream; warning threshold exceeded
High exhaust gas temperature EGR cooler
downstream; shut off threshold exceeded
Turbocharger Wastegate CAN feedback; warn-
ing threshold exceeded
Turbocharger Wastegate CAN feedback; shut
off threshold exceeded
Exhaust gas temperature upstream turbine;
warning threshold exceeded
Exhaust gas temperature upstream turbine;
shut off threshold exceeded
Ashlamp; open load
Sensor vehicle speed; plausibility error
Ashlamp; short circuit to battery
Ashlamp; short circuit to ground
Regeneration inhibit switch not available; Com-
InhSwtNA
Regeneration release switch not available;
ComRegSwtNA
DPF system; operating voltage error
CAN message ComMS_Sys7 not received
from slave
Metering control is not performed in time error
Master ECU and Slave ECU have been identi-
fied as the same types
Master ECU and Slave ECU data sets or soft-
ware are not identical
SCR mainrelay; open load (only CV56B)
SCR mainrelay; powerstage over temperature
(only CV56B)
SCR mainrelay; short circuit to battery (only
CV56B)
SCR mainrelay; short circuit to ground (only
CV56B)
SCR reversing valve; open load
SCR reversing valve; over temperature
D 23.18 75