Attention!
If motor is hot when changing oil, be careful
to remove oil container. Hot oil is released
with more pressure, and may cause burns.
4. When oil has been fully drained, screw back
oil container.
5. Remove cover (1) and fill up with oil.
Replace cover.
68
1
2
1
1
2
1
6. Check the level of oil with indicating rod
(2). For better reading, firmly hold cover on
tube before removing the rod. Keep oil at rod
"Full" level.
2
2
Note:
Frequently check level of motor oil to
prevent damage due to lack of oil.
Air filter
Motor will not run properly with dirty air filter.
Frequently clean the filter, preferably with
compressed air. See motor manual.
To clean air pre-filter
The pre-filter must be free from dirt to avoid
damage to the motor due to overheating. Clean
with compressed air or wash in running water
with mild soap.
www.trapp.com.br