Technical Data; Noise Information - Bosch GCM 12 GDL Professional Manual Original

OBJ_BUCH-1360-005.book Page 36 Wednesday, December 21, 2016 1:10 PM
36 | English
45 Rear fastening screw
(cover plate/retracting blade guard)
46 Cover plate
47 Spindle lock
48 Hex socket screw for mounting of saw blade
49 Clamping flange
50 Interior clamping flange
51 Clamping lever of the saw-table extension
52 Clamping lever of the adjustable fence
53 Cover plate tab
54 Glide movement controller
55 Set screws for damping 56 Mounting holes for material clamp
57 Wing bolt
58 Threaded rod
59 Mitre angle indicator
60 On/Off switch
61 On/Off switch for laser (cutting line indication)

Technical Data

Sliding Mitre Saw
Article number
Rated power input
No-load speed
Reduced starting current
Laser type
Laser class
Divergence of laser line
Weight according to EPTA-Procedure 01:2014
Protection class
Permissible workpiece dimensions (maximum/minimum) see page 41.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Mounting hole diameter

Noise Information

Sound emission values determined according to
EN 61029-2-9.
Typically the A-weighted noise levels of the product are:
Sound pressure level 93 dB(A); Sound power level
106 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN 61029 and may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
1 609 92A 2P3 | (21.12.16)
62 Screws for insert plate
63 Clamping screw of the material stop
64 Adjustment screw for laser position (flush levelling)
65 Screws for laser protection cap
66 Fastening screw for laser mounting plate
67 Fastening screw for laser housing
68–70
Set screws for 0° basic setting (bevel angle)
71 Set screw for 45° basic setting (leftward bevel angle)
72 Set screw for 45° basic setting (rightward bevel angle)
73 Set screws of scale 37 for mitre angles
74 Screw for mitre angle indicator 75 Set screw for clamping force of lock lever 17
76 Velcro strap
77 Exit opening for laser beam
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
3 601 M23 600
3 601 M23 630
3 601 M23 670 3 601 M23 660
W
-1
min
nm
mW
mrad (full angle)
kg
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
mm 305
applications, with different accessories or poorly maintained,
mm 1.7–2.6
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
mm 30
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work
patterns.
GCM 12 GDL
3 601 M23 690
3 601 M23 6P0
2000 1500
3800 3800

–
635 635
< 1 < 1
2 2
1.0 1.0
32.1 32.1
/II /II
Bosch Power Tools
1800
3800

635
< 1
2
1.0
32.1
/II