Working Range - Gesipa TAUREX 1-4 Axial Instrucciones De Uso

• The blind rivet setting tool should always be disconnected from the compressed air sys-
tem when carrying out maintenance work and when the tool is not in use.
• Always wear protective goggles when working with the blind rivet setting tool. Personal
protective equipment such as protective clothing, gloves, safety helmet, non-slip foot-
wear, ear protection and fall arresting device is recommended.
• Do not exceed the permitted working pressure.
• When putting down the blind rivet setting tool, make sure that it cannot fall.
• Repairs must be carried out only by skilled personnel. In case of doubt, always send in
the complete (not disassembled) blind rivet setting tool to the supplier or to GESIPA
• Dispose of the used hydraulic oil in accordance with valid environmental protection
regulations.
4.

Working range

Tool type
Standard blind rivet Ø (mm)
Max. mandrel Ø (mm)
TAUREX 1 TAUREX 2
Axial
2.4 - 3.2
up to 4 Al/steel up to 6 Al/steel
2.5
TAUREX 3
Axial Axial
up to 5 up to 6.4
All materials
3.2 4.5
TAUREX 4
Axial
up to 6.4
- up to 8 Al
4.5
GB
.
®
15