Factory Set; How To; Troubleshooting - Clatronic DVD 619 HC Instrucciones De Servicio

Factory Set

If you want to return the initial language setting to the
factory default, do the following:
1. Press the SETUP button.
2. Use the cursor button to select the Rating, then press
the ENTER button.
3. Use the cursor button to shift and select the Factory
Set, then press the ENTER button.
4. Use the cursor button to shift and select Yes, then
press the ENTER button.
5. To exit the FUNCTION SETUP MENU and return to the
normal screen, press the RETURN button.
Handle a CD
➤ Never touch the surface of a CD. Hold the disc exclusi-
vely by its inner and outer edges.
➤ If dust or other particles soil the CD use a soft dry cloth
to remove from the centre to the edges.
➤ Do NOT use anti-static spray, benzene, thinner or vinyl
solvents to clean the CD. Chemicals may destroy the
surface of the disc.
➤ Do not stick or write anything on the CD.
➤ Always store the CD in its intended cover.
➤ Do not expose the CDs for a longer period of time to
direct sunlight or extreme heat.
Before calling customer service if you have problems with this device, please search for the possible fault in the table
below. With a few simple tests or minor adjustments you may be able to rectify the problem so that the device functions
correctly again.
Symptom (frequent) Remedy
No power Insert the mains plug into the
socket.
• No playback • Condensation has formed: Wait
even if PLAY is
pressed.
• Playback begins • The device can only play back
but stops again
immediately.
• The disc may be dirty and
• Ensure that the disc has been
5....-05-DVD 619_GB 105
HOW TO USE

HOW TO

TROUBLESHOOTING

approx. 1 to 2 hours until the
device has dried out.
the following media: DVDs,
video CDs, CDs, MP3s and
JPEGs.
require cleaning.
inserted with the label facing
upwards.
When you reset the Unit to the factory default, the Unit will
take 3-5 seconds to reset.
Clean the device
Be sure to turn off the device and disconnect the power
cord before cleaning. Wipe the device with a soft, slightly
moist cloth.
Important
Always remove all discs before transporting the device!
Symptom (frequent) Remedy
No picture. • Ensure that the device is proper-
ly connected.
• Ensure that the television is
turned to „video".
• No sound. • Ensure that the device is proper-
• Distorted sound. ly connected.
• Ensure that the television and
stereo system have been adjus-
ted correctly.
• Adjust the main volume via the
remote control.
The picture is In this case the picture is some-
distorted during times a little distorted - this is
fast forward or fast normal.
rewind.
105
24.05.2004, 14:41:34 Uhr