Radio Operation; Setting Stations Manually; Automatic Station Search; Storing Radio Stations - Clatronic DVD 619 HC Instrucciones De Servicio

Tuning into a station manually
1. Press the ON/OFF button on the device. The standby
light is on.
2. Set the Function button until the display indicates the
frequency band.
3. Select the desired band (FM/AM) with the band selec-
tor.
4. Press the TUNING
desired station.
If you have selected an FM station broadcasting in stereo
bring the FM mode switch into STEREO. Stereo will
appear on the display.
If the broadcast signal is too weak and an unpleasant
background noise can be heard we recommend setting
this switch to Mono. The station is then received in Mono
mode only while the background noise is greatly reduced.
Tuning into a station automatically
Holding the Tuning button for around 2 second starts the
automatic search for stations. The search will stop as soon
as a station is found with a suffi ciently strong signal.
Presetting stations
A total of 40 radio stations can be preset which can then
be directly tuned into via the number buttons. 20 FM
stations and 20 AM stations:
1. Press the ON/OFF button on the device. The standby
light is on.
2. Set the Function button until the display indicates the
frequency band.
3. Select the desired band (FM/AM) with the band selector.
4. Tune into the desired station with the tuning button.
5. Press the Memory button on the remote control.
6. Use the NEXT or PREV button to select the memory
number and confi rm your entry with the Memory
button. If this number is already assigned press the
Memory button twice.
7. Repeat steps 3 – 6 until all radio stations have been set.
5....-05-DVD 619_GB 101

RADIO OPERATION

button to tune into the
Tuning into a preset station
1. Press the ON/OFF button on the device.
2. Set the Function button until the display indicates the
frequency band.
3. Select the desired radio station with the number
buttons.
Notes:
When assigning a number beyond 10 fi rst press the +10
button and then the respective number. Example: For
memory number 15 fi rst press +10 and then 5.
The set radio station can also be set in playback mode
with the Prev/Next button.
Radio Data System (RDS) /
Programme Types (PTY)
Today many stations transmit so-called RDS (Radio
Data System) codes that contain a variety of additional
information along with regular sound signals through FM
broadcasting.
If the stereo is currently receiving an RDS station, it dis-
plays the station name.

Radio text

Some RDS stations transmit information known as
Radiotext. Radiotext provides additional information about
the station and its programmes. To activate this function
proceed as follows:
1. Select the desired RDS station with the SKIP buttons
on the remote control, or select RDS station directly
with the numbered button on the remote control.
2. To call up Radiotext keep pressing the DISPLAY button
on the remote control, until "RT" displayed.
If Radiotext is not provided by the selected station, only
the station frequency will be shown in the display.
It takes about 2 minutes to receive all Radiotext character.
101
24.05.2004, 14:41:31 Uhr