Premier ED-5189PRO Manual De Instrucciones página 27

HOW TO USE
•
START/STOP(ON/OFF) Button
This button is to start the operation. After a function is selected, the product will only operate after pressing the
Press again to stop operation. In Ready Mode and Standby Mode, this button flashes red light. It display green light in
operation.
•
Manual Button
After pressing this button, the Speed Setting
settings can also be adjusted during operation. In this mode, the Manual Button flashes white light.
•
Pulse Button
This is Pulse Button, and it can only operate when the button is kept pressing. The motor runs in full speed (i.e. Speed H)
with a soft start. This button has no time limit and overrides the program functions. That means when the Pulse Button is
pressed on hold, the product directly enter the Speed H. The product resumes Ready Mode upon the release of this button.
This button keeps light on white light.
•
Program Buttons ,
Icon Function
Speed H for 5s, stop for 2s. Run the cycle 4 times.
Rinse
Preset display is 28s and Speed H. All soft start.
Speed H for 3s, stop for 3s. Run the cycle 10 times.
Puree
Then run in Speed H for 40s. Preset display is 1m 40s and Speed H. All soft start.
Increase from Speed 1 to Speed 7 in 5s. Then increase to Speed H in 5s.
Soup
Keep in Speed H until 8min. Preset display is 8min and Speed 1. All soft start.
This button flashes when the product starts up.
Manual
Preset display is 30s and Speed 3. All soft start.
Speed H for 8s, stop for 2s. Run the cycle 5 times.
Smoothie
Preset display is 50s and Speed H. All soft start.
Hard start in Speed H for 2s, stop for 4s. Run the cycle 10 times.
Crush
Preset display is 1min and Speed H. All soft start.
Speed H for 4s, stop for 2s. Run the cycle 10 times.
Frozen
Preset display is 1min and Speed H. All soft start.
• Use Selection Dial to select the desired program, the corresponding icon will flash. Then press the "
the selected program, and the "
program. The product resumes Ready Mode.
• If the Time / Speed Setting is adjusted during operation in any preset program. The product will switch to
short-cut button light will change to
•
Instruction of All Working Modes
•
Manual Mode
Use the Selection Dial to select the
operation. If the user wants to stop the operation, press the
Mode.
, , , & , total 6 programs. The descriptions of each program are mentioned below :
Procedure
" Button lights on green LED. Press the "
Button.
icon. The adjust the Time Setting and Speed Setting. The press
/ and Time Setting
Button again. The product stops running and resumes Ready
6
/ can be adjusted. Both
Display Lighting
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
LED flashes in 0.5s
Time & Speed
ON / 0.5s OFF cycles
" Button to run
" again during operation will stop the
Button to start
button.
mode, and