Tabla de contenido
Idiomas disponibles
Idiomas disponibles
HOW TO USE
•
Time Setting Buttons (
When the time is within 1 minute, "01:00", press
seconds. When the time is more than 1 minute "01:00", press
decreases 10 seconds.
•
After keep pressing
seconds at the rate 3 flash/second when the time is within 1 minute. If the time is more than 1 minute, the time display will
increase or decrease 10 seconds at the rate 3 flash/second. The buzzer will beep on every pressing of the button.
•
The longest time setting is "
by adjusting the cyclic Time Setting as illustrated below :
00:00
10:00
-
+
Remark : When the product is in operation, the timer countdowns in time interval of 1 second unit it shows "
then the product stops.
•
Speed Setting
Press
or
button. The sequence of the speed setting is " 1, 2, 3, 4, 5, 6, 7, 8, 9, H " and it cannot be adjusted in cycles (i.e. press
button in Speed H, the speed remains unchanged. User can only press
press
button in Speed 1, the speed also does not change. User can only press
(The buzzer will beep on every pressing of the button )
(The motor power, voltage and speed at 120V~60Hz input & no load condition are shown below) :
Remark : Start up of every speed setting is soft start.
/
)
for 3 seconds, the buzzer will beep, and the time display will increase or decrease 5
" (10:00). When the time is set to "
Remark :
1.In operation 00:00-10:00. 10:00-00:00 repeat
2.Not in operation 00:00-10:00. 10:00-00:00 can repeat
(Speed+,Speed-)
to increase or decrease the speed by 1 setting. The buzzer will beep on every pressing of the
once increases 5 seconds, and press
once increases 10 seconds, and press
", it does not operate. It can work continuously
5
once decreases 5
once
", and
to decrease the speed. Similarly,
to increase the speed.
Capítulos
Tabla de contenido
