Selecting The Video Input Source; Labeling The Video Input Sources - Toshiba 30HF66 Manual Del Propietário

Selecting the video input source
Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select ANT, VIDEO1,
VIDEO2, VIDEO3, ColorStream HD1, ColorStream HD2, or HDMI,
depending on which input jacks you used to connect your devices
(see "Connecting your TV" on pages 7-14).
SOURCE SELECTION
0. ANT
1. VIDEO1
2. VIDEO2
3. VIDEO3
4. ColorStream HD1
5. ColorStream HD2
6. HDMI
1_/O-6:SELECT
NEVER CONNECT THIS TV TO A
PERSONAL COMPUTER (PC).
This TV is not intended for use
with a PC.
Pressing TV/VIDEO on the
remote control displays the
current signal source. (Press TV/
VIDEO again, A/V, or 0-6 to
change the source.)
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
E
VCR
DVD
DTV
SAT
CBL
HD
Uses the default label name
Video cassette recorder
DVD video
Digital TV set-top box
Satellite box
Cable box
HDMI device (HDMI only)
To label the video input sources:
1. Press MENU, and then press 4 or
to display the OPTION menu.
2. Press A or V to highlight VIDEO
LABEL.
3. Press _ to display the VIDEO
LABEL menu.
4. Press A or V to highlight the video
source you want to label.
5. Press 4 or _ to select the desired
label for that input source.
6. Press EXIT to return to normal
viewing.
D_LTJDJ_
ONJOFF TAMER _FF
FAVORITE OH
CH LABEL
(_ :SELECT L_:ADJUST
VIDEO LABEL
2.V DEO2 _ _'_ _
3.VIDEO3
4.ColorStream HD1
S.ColorStream HD2
6.HDI_I
OPTION MENU
t_}:SELECT _F :ADJ UST
TV/Video
0-6
Menu
AT_
Exit
28
3W70721B En p23-29 28 _lb, 3/4/06, 6:25 PM