Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting
a DTV receiver
/ set-top box with
ColorStream
®(component
video)
and a VCR
This connection allows you to watch DTV (digital TV), VCR, and TV
programs, and record DTV and TV programs.
Your TV has ColorStream '_'(component video) inputs. Connecting your
TV to a DTV receiver with component video can greatly enhance
picture quality and realism.
From antenna
Stereo VCR
Back panel of TV
From DTV
antenna
You will need:
three coaxial cables
two sets of standard A/V cables
one set of standard audio cables
one set of component video cables
Note:
You can connect the component video cables
to either set of ColorStream jacks on the TV
(HD- 1 or HD-2).
The ColorStream HD-1 and HD-2 jacks and
HDMI jacks can be used with Progressive
(480p, 720p) and Interlaced (480i, 10800
scan systems. A 1080i signal will provide the
best picture performance.
If your DTV receiver does not have compo-
nent video, use the S-video and standard
audio connections instead. Do not connect
both an S-video and a standard video cable
to VIDEO-1 (or VIDEO-2 or VIDEO-3) at the
same time or the picture performance
will be
unacceptable.
For HDMI connection, see page 13.
The unauthorized
recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
DTV Receiver
with Component
video
11
3W70721A
En p07-14
11
20/3/06, 9:32 AM
Capítulos
Tabla de contenido
