Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Connecting
an audio system
This connection allows you to use external speakers with an external
audio amplifier to adjust the sound level.
To control the audio:
Turn on the TV and the stereo amplifier.
Turn off the TV's built-in speakers (see "Turning off the built-in
speakers" on page 38).
Note: To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set to a reasonable
listening level.
Back panel of TV
You will need:
* one pair of standard audio cables
Amplifier
Connecting
an A/V amplifier
with built-in
digital
surround
This connection allows you to use an audio amplifier with built-in
digital surround and external speakers.
See "Selecting the digital output format" on page 39.
Back panel of TV
You will need:
* one coaxial digital cable
* Six sets of speaker cables
Note:
Refer to the Owner's manual of the audio
amplifier as well.
TV
Subwoofer
Front
\
/ Speaker
speFr_ntr
"_7_(Left)
_
I
_
_(Rig
ht)
_
Center Speaker
_.........._...._-- Surround Speaker
k]
(Left)
_
Speaker (Right)
The COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analog
broadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver's inputs.
Consult the owner's manual for your receiver to determine the best way to switch between the analog and digital signals.
14
3W70721A
En p07-14
14
20/3/06, 9:32 AM
Capítulos
Tabla de contenido
