Selecting The Video Input Source; Setting The Clock; Setting The On/Off Timer - Toshiba FST PURE 32DF46 Manual Del Usuario

Selecting the video input source

Press TV/VIDEO to view a signal from another device connected to
your TV, such as a VCR or DVD player. You can select ANT, VIDEO 1,
VIDEO 2, or ColorStream, depending on which input jacks you used to
connect your devices (see "Connecting your TV" on page 7.)
S O U R C E S E L E C T I O N
0 . A N T
1 . V I D E O 1
2 . V I D E O 2
3 . C o l o r S t r e a m
/ 0 - 3 : S E L E C T

Setting the clock

You must set the clock before you can program the ON/OFF timer.
To set the clock: (Example: "8:30 AM" March, 25 (SAT), 2006)
1. Press MENU, then press
display the SETUP menu.
2. Press L or M to highlight CLOCK
SET, then press
3. Press or to set the MONTH,
then press M.
4. Set the DAY, YEAR and TIME as in
step 3.
After setting the clock, the date and
time function starts automatically.
5. Press EXIT to return to the normal
screen.

Setting the ON/OFF timer

This feature allows you to program the TV to turn on or off
automatically at a set time. If you program the ON TIMER to "DAILY,"
the TV will turn on every day at the same time to the same channel
until you clear the ON TIMER.
To set the ON timer: (Example: Turning on the TV to channel 12
at 6:30 AM, DAILY)
1. Set the clock, if you have not already done so (see above.)
2. Press MENU, and then press
3. Press L or M to highlight ON/OFF TIMER.
4. Press or to highlight SET, then press ENTER. The ON/OFF
TIMER menu appears.
5. Press L or M to highlight ON TIMER,
then press to highlight the hour
position.
6. Press L or M to set the desired hour,
then press .
7. Set the desired minutes and channel,
as in step 6.
8. Press or to select ONCE or
DAILY, then press ENTER.
9. Press EXIT to return to normal
viewing.
To set the OFF timer:
Select OFF TIMER in step 5, above.
To cancel the ON/OFF timers:
Select CLEAR in step 8, above.
Press EXIT to return to normal viewing.
J3W30421A(E)_P22-30 27
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-3 to change)
or to
S E T U P
L A N G U A G E
.
C L O C K S E T
T V / C A B L E
C H P R O G R A M
A D D / E R A S E
: S E L E C T
C L O C K S E T
M O N T H
D A Y
Y E A R
T I M E
: S E L E C T
E N T E R : S E T
or to display the OPTION menu.
O N / O F F T I M E R
O N T I M E R
6 : 0 0 A M
O F F T I M E R
1 2 : 0 0 A M
O P T I O N M E N U
: S E L E C T
O N / O F F T I M E R
O N T I M E R
6 : 3 0 A M
O F F T I M E R
1 2 : 0 0 A M
O P T I O N M E N U
: A D J U S T
Note:
When ColorStream is selected, the video
OUT jack does not output a signal. To receive
a video OUT signal, you must use a standard
video or S-video connection instead.
Note:
After a power failure or disconnection of the
power, the clock settings will be lost.
E N G L I S H
C A B L E
: A D J U S T
1
1 ( S U N )
2 0 0 6
1 2 : 0 0 A M
: A D J U S T
E X I T : E N D
Notes:
• After a power failure or disconnection of the
power, the ON/OFF timer settings will be lost.
C H 3
C L E A R
• To return to the OPTION menu from the
ON/OFF TIMER menu, press L or M to
C L E A R
: A D J U S T
highlight OPTION MENU, then press
E X I T: E N D
C H 4
O N C E D A I LY C L E A R
C L E A R
E N T E R : S E T
E X I T: E N D
27
22/03/2006, 4:21 PM
TV/Video
Menu/
Enter
Exit
or .