Transport; Standard Equipment - Ottobock Discovery Instrucciones De Uso

Adjustment and Adaptation Possibilities
A
B
Figure 9

Transport

Minimizing the Dimensions – If your mobility base for seating shells and the seating shell used are equipped
with an interface adapter system with a quick-release lock, you can make the mobility base with seating shell
more manageable e.g. to stow when traveling by car. First remove the seating system and the footrests from
the mobility base. Pull the locking strap (Fig. 9, item A) and fold the back frame to the front until it rests on the
seat tubes (Fig. 10). When unfolding, make sure that the stud (Fig. 9, item B) engages in the bore hole (Fig. 9,
item C) provided for this. Make sure that the back frame fully engages on both sides when unfolding it.
Safety in motor vehicles - The frame features four fixing eyelets (Fig. 10, item A). If you want to secure the
mobility base with straps, use these attachment points only.

Standard Equipment

A
Figure 11
Height Adjustable Pushbar (Fig. 11)
It can be adjusted vertically to a more comfortable height for the person pushing the chair.
To do this, open the clamping levers on the right and left of the back tubes (Fig. 11, item A), move the pushbar
to the desired height and re-tighten the clamping levers until they are snug.
The adjustment range is approx. 20 cm.
Height Adjustable Push Handles (Fig. 12)
They can be adjusted vertically to a more comfortable height for the attendant.
To do this, open the clamping levers on the right and left of the back tubes (Fig. 12, item A), move the push
handles to the desired height and re-tighten the clamping levers until they are snug.
The adjustment range is approx. 20 cm.
28 | Ottobock
C
A
Figure 10
A
Figure 12
A
Discovery