Disassembly/Transport - Ottobock MPS Instrucciones De Uso

Settings and use
NOTICE
Improper use of the canopy
Damage to the fabric through user error
X Remove the canopy before folding the rehab buggy�
X Remove the canopy from the rehab buggy if it is stored for a long period to protect it from damage�
The seat can be equipped with a canopy to protect the user from sun or rain�
Mounting the brackets
1� Use the screws to attach the brackets to the adapters provided for this purpose on the backrest�
Mounting the canopy
1� Move the backrest to an upright position�
2� Move the locking tongues for the canopy into parallel mounting position�
3� Press the locking tongues for the canopy into the buckles until they click into place audibly�
Adjusting the canopy angle
1� Fold up the canopy�
2� Hold the canopy at the front support and change the angle by pressing or pulling on the support� The setting
joint locks into place automatically�
Removing the canopy
1� Move the backrest to an upright position�
2� Release the locking tongues for the canopy from the buckle by pressing lightly (see Fig� 59)�
3� Pull the locking tongues out and remove the canopy�
6.13

Disassembly/transport

CAUTION
Exposed pinch points
Crushing, pinching due to incorrect handling
X When folding out the backrest, only grip by the specified components�
NOTICE
Deformation when folded
Damage to the product, problems unfolding due to unallowable loads
Never place heavy objects on the folded product�
The seat has to be removed from the mobility base for transport�
26 | Ottobock
59
MPS