Miscellaneous; Entering A Switch-On Message; Displaying The Serial Number; Resetting The Device - Blaupunkt Bremen MP76 Instrucciones De Manejo E Instalación

Miscellaneous

Entering a switch-on message

If you switch on the device, a brief message
is shown on the display as scrolling text.
This text is factory set to "BLAUPUNKT-THE
ADVANTAGE IN YOUR CAR". Instead, you
can enter your own text of up to 35 char-
acters.
u Press the MENU button 9.
u Press the softkey 5 with the display
label "VARIOUS".
Press the softkey 5 with the display
u
label "ON MSG".
The display shows the standard text for the
switch-on message. The input mark is at the
beginning of the line and fl ashing.
To input a different text,
u press the joystick 8 left or right to
move the input mark.
u
Set the desired letter by pushing the
joystick 8 up or down.
u
After entering the message, press the
OK joystick 8 or the MENU button 9
to exit the menu.
The settings are saved.

Displaying the serial number

You can display the serial number of the
device.
Press the MENU button 9.
u
u Press the softkey 5 with the display
label "VARIOUS".
u Press the softkey 5 with the display
label "SER NUM".
The serial number of the device is displayed
in the top line of the display.
u Press the OK joystick 8 or the MENU
button 9 to exit the menu.

Resetting the device

You can reset the device to the factory-pre-
set parameters. All personal settings are
lost in the process.
u Press the MENU button 9.
u Press the softkey 5 with the display
label "VARIOUS".
Press and hold the softkey 5 with the
u
display label "NORMSET" for longer
than two seconds.
The device switches off and automatically
on again.
Miscellaneous
51