Optimising Radio Reception - Blaupunkt Bremen MP76 Instrucciones De Manejo E Instalación

Radio mode
Activating PTY
To use the PTY function,
u press the TUNER button = in radio
mode.
The display shows the radio function
menu.
u Press the NEXT button 4.
u Press the softkey 5 with the display
label "PROG TYP".
If PTY is activated, the display shows the
current programme type. PTY is illuminat-
ed on the display. The programme types are
shown next to the softkeys 5.
Deactivating PTY
To deactivate the PTY function,
press the softkey 5 with the display
u
label "PTY OFF" while the programme
types are displayed.
Selecting a programme type and
starting seek tuning
The PTY menu has several pages on which
the known programme types are displayed.
To scroll through the individual pages of the
PTY menu,
u press the NEXT button 4 until the de-
sired programme type is displayed next
to one of the softkeys.
u Press the softkey 5 with the desired
programme type.
u Move the joystick 8 up or right or
down or left to start the seek tuning.
The radio will then tune into the next
receivable station that it fi nds that corre-
sponds to your selected programme type.
22
If the tuner does not fi nd a station that cor-
responds to the selected programme type,
you will hear a beep and "NO PTY" appears
briefl y in the display. The radio will then re-
tune to the station that it received last.
If you want to return to the display of the
programme types,
u
call up the second page of the ra-
dio function menu again and press
the softkey 5 with the display label
"PROG TYP".

Optimising radio reception

Treble reduction feature during
interference (HiCut)
The HiCut function causes a reduction of
the interferences during poor radio recep-
tion. If interference occurs, the system au-
tomatically reduces the treble thus reduc-
ing the interference level.
Adjusting HiCut
u press the TUNER button = in radio
mode.
The display shows the fi rst page of the radio
function menu.
u Press the NEXT button 4.
Press the softkey 5 with the display
u
label "HIGH CUT" repeatedly until the
desired setting appears.
"HICUT 0" means that no automatic reduc-
tion of the treble and interference level will
be made; "HICUT 2" means that a maximum
reduction will be made.
u Press the OK joystick 8 or the TUNER
button = to exit the menu.
The settings are saved.