Selecting Timers; Traffi C Information; Switching Traffi C Information Priority On/Off - Blaupunkt Bremen MP76 Instrucciones De Manejo E Instalación

Ocultar thumbs Ver también para Bremen MP76:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 105
TIM – Traffi c Information Memory
During the TIM readiness, a con-
nected motorised antenna is ex-
tended.
Note:
It is absolutely necessary to switch off
TIM before entering a car wash. For
instructions, please read the section
"Switching TIM off" in this chapter.

Selecting timers

After you have set the timers, you can select
between the two timers. The timer which
you adjusted last is always active.
To select a timer,
u
in radio mode, hold the TUNER button
= pressed for longer than two sec-
onds.
The TIM PLAY menu is displayed.
Press the NEXT button 4.
u
The TIMSET menu again.
u
Press the softkey 5 with the display
label "TIMER1" to select the fi rst timer
or "TIMER2" to select the second tim-
er.
u
press the TUNER button = or the OK
joystick 8.
The settings are saved.
26
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON (Enhanced Other Network)
is the transmission of station information
within a broadcasting network.
Whenever a traffi c announcement (TA) is
broadcast, the system switches automati-
cally from a station that does not provide
traffi c reports to the appropriate traffi c in-
formation station within the broadcasting
network that does.
Once the traffi c report has been played, the
system will switch back to the programme
that you were listening to before.
Switching traffi c information
priority on/off
Press the TUNER button = in radio
u
mode.
The display shows the radio function
menu.
u
Press the softkey 5 with the display
label "TRAFFIC" repeatedly until the
desired setting "TRAFFIC INFO ON" or
"TRAFFIC INFO OFF" appears.
Note:
The TA menu is displayed during a traf-
fi c announcement.
To interrupt the current traffi c announce-
ment,
press the softkey 5 with the display
u
label "TA EXIT".
If you want to switch off the priority for traf-
fi c announcements in general,
press the softkey 5 with the display
u
label "TA OFF".
Traffi c information
Tabla de contenido
loading

Este manual también es adecuado para:

7 646 829 310

Tabla de contenido