Tabla de contenido
Idiomas disponibles
Idiomas disponibles
// USER MANUAL
TASK/CHECK
Check the frame for damages and deformation.
→ There must be no damages.
Check whether all cables and hoses are in the cable clips and verify the tight fit of the clips.
→ All cables must fit firmly in the cable clips.
Check the tightening torques of the pivot points of the rear triangle and the shock mount.
→ You can find the torque values in the assembly instructions of your bike.
Check the suspension elements for damages.
→ There must be no damages.
Sit on the bike with all your cycling equipment (helmet, backpack, shoes, etc.) and take a normal riding position.
→ We recommend a SAG of 15% - 20% on the fork and 20% - 30% on the shock.
→ If necessary, change the air pressure of your suspension elements. If you have ordered a shock with steel spring you have already chosen a
spring rate corresponding to your weight.
6.2
AFTER YOUR RIDE
Before your first ride Before each ride
CLEANING YOUR BIKE
X
X
DANGER
X
RISK OF ACCIDENT DUE TO BRAKE FAILURE OR REDUCTION OF BRAKING FORCE DUE TO DIRTY BRAKE PADS OR BRAKE ROTORS!
X
Brake pads and brake rotors must not come into contact with lubricating substances such as oil, grease (including skin grease), wax, silicone, Teflon etc.! Brake pads or brake contact surfaces contaminated in this way
must no longer be used!
X
X
After your ride, you should clean your bike thoroughly using a soft cloth and clear water. Never use a high pressure washer! Stubborn dirt can be removed with special cleaning agents for bicycles and their
components. Pay attention to the notes and recommendations for use printed on the respective cleaner. After having cleaned your bike, you must lubricate the chain (see „Chain maintenance").
X
Pay particular attention to cleanliness in the area of the moving parts of the fork and the shock. Dirt in this area may cause premature wear and thus decrease the performance of your suspension elements.
CHAIN MAINTENANCE
The bike chain is the most important part of the drivetrain system. An oily chain attracts dirt and thus accelerates wear.
Please regularly follow the steps below to ensure a long and reliable service life of your chain:
1.
Clean the chain with an oil-soaked cloth.
2.
Lubricate the chain using chain oil.
3.
Wipe away excess oil with a dry, lint-free cloth.
Tabla de contenido
