Work Area; Personal Protective Equipment; Before Use; Charging The Battery - Hilti SID 14-A Manual De Instrucciones

j) If the battery gets too hot to touch, this may indicate that it
is faulty. Place the tool in a location where it can be kept
under observation, well away from flammable materials,
and allow it to cool down. Contact Hilti Service after the
battery has been allowed to cool.
5.2.4 Electrical safety
en
Before beginning work, check the working area (e.g. using a
metal detector) to ensure that no concealed electric cables or
gas and water pipes are present. External metal parts of the
power tool may become live, for example, when an electric cable
is damaged accidentally. This presents a serious risk of electric
shock.

5.2.5 Work area

a) Ensure that the workplace is well lit.
b) Ensure that the workplace is well ventilated. Exposure to
dust at a poorly ventilated workplace may result in damage to
the health.

5.2.6 Personal protective equipment

The user and any other persons in the vicinity must wear
suitable eye protection, a hard hat, ear protection, protective
gloves and breathing protection while the tool is in use.

6 Before use

6.1 Battery use and care
NOTE
Battery performance drops at low temperatures. Use the tool only
after fully charging the battery. This ensures that maximum battery
capacity is available. Change to a second battery as soon as a
drop in performance is noticed. Recharge the battery immediately
so that it is ready for reuse.
Store the battery in a cool, dry place. Never store the battery
where it is exposed to direct sunlight or sources of heat, e.g. on
heaters / radiators or behind a motor vehicle windscreen. Batteries
that have reached the end of their life must be disposed of safely
and correctly to avoid environmental pollution.

6.2 Charging the battery

DANGER
Only used the specified Hilti battery packs and Hilti battery
chargers which are listed under "Accessories".
6.2.1 Charging a new battery for the first time
Charge the battery fully before using it for the first time.
24
Printed: 19.09.2013 | Doc-Nr: PUB / 5071661 / 000 / 02