Setting The Waveband/Memory Bank; Tuning Into A Station; Station Seek Tuning; Tuning Into Stations Manually - Blaupunkt Hamburg MP68 Instrucciones De Manejo

Tuner mode
•
Band: The Band menu allows selecting
the waveband or the memory bank.
You can switch between the menus with
the rocker switch or
Setting the waveband/ memory
bank
You can adjust and set radio stations of the
FM and AM wavebands.
The FM and AM wavebands each feature 2
memory banks: FM and FMT as well as AM
and AMT. Each of the 4 memory banks fea-
tures 10 memory locations.
Press the rocker switch
u
open the "Band" menu.
Press the rocker switch
u
select the desired waveband or memo-
ry bank.
Press the OK button
u
The desired waveband or memory bank is
adjusted. After a short period of time, the
display automatically returns to the "List"
menu.
You can now perform the following actions
in this waveband/memory bank:
•

Tuning into a station

•
Storing stations
20
:
.
:
twice to
:
or to
2
.
Tuning into a station
There are 3 ways of tuning into a station :
•
Tuning into stations automatically

(station seek tuning)

•

Tuning into stations manually

•
Selecting stored stations
Station seek tuning
Press the # button of the alphanumer-
u
9
ic keys .
"SEEK" and the current frequency appear
on the display.
Press the rocker switch
u
If you press and hold the rocker switch
:
or , automatic seek tuning skips the
stations found until you release the rocker
switch again.
Note:
You can also activate the "SEEK" func-
tion by using the rocker switch
open the "Tune" menu and pressing the
2
OK button .
The tuner searches for the next receivable
station in the current waveband. The ad-
justed sensitivity of the station seek tuning
(section "Changing the seek tuning sensitiv-
ity") is taken into consideration.
Tuning into stations manually
Press the # button of the alphanumer-
u
9
ic keys .
"SEEK" and the current frequency appear
on the display.
:
or .
:
to