Changing The Day/Night Brightness (D-Day/D-Night); Mixing The Color For The Display Illumination (Disp Col); Selecting The Colour Of The Display Illumination From The Colour Scan (Col Scan) - Blaupunkt Hamburg MP68 Instrucciones De Manejo

Changing the day/night brightness
(D-DAY/D-NIGHT )
The device automatically switching to night
mode if you turn on the light of your vehicle.
For this purpose, the device must be con-
nected with your vehicle via a correspond-
ing connection as described in the installa-
tion instructions.
You can adjust the display brightness sepa-
rately for day and night.
In the System menu, press the rocker
u
:
switch or
menu item "D-DAY" (day brightness) or
"D-NIGHT" (night brightness) is
selected.
Press the OK button
u
menu item.
The current setting is displayed.
Use the rocker switch or
u
select the desired setting between 1
and 16.
Press the OK button
u
ferent function, or press the DIS•ESC
;
button to exit the menu.
Mixing the color for the display
illumination (DISP COL )
To customise the display illumination to suit
your tastes you can mix a colour yourself us-
ing the three primary colours red, green and
blue (RGB).
In the System menu, press the rocker
u
:
switch or
"DISP COL" menu item is selected.
Press the OK button
u
menu item.
repeatedly until the
2
to call up the
:
to
2
to select a dif-
repeatedly until the
2
to call up the
The current settings for "GREEN", "RED" and
"BLUE" are displayed.
Select a colour with the rocker switch
u
:
or .
Adjust the value for the selected col-
u
our with the rocker switch or
tween 0 and 16.
After you adjusted all colours as desired,
press the OK button
u
ferent function, or press the DIS•ESC
;
button to exit the menu.
Selecting the colour of the display
illumination from the colour scan
(COL SCAN )
During the colour seek, the colour of the dis-
play illumination changes continuously, and
you can select the current colour.
In the System menu, press the rocker
u
:
switch or
"COL SCAN" menu item is selected.
Press the OK button
u
menu item.
The colour seek is started. "AUTO COLOR-
SCAN" appears on the display.
Press the OK button
u
current colour, or press the DIS•ESC
;
button to cancel the colour seek
without selecting a new colour.
User settings
:
be-
2
to select a dif-
repeatedly until the
2
to call up the
2
to select the
57