Fri-Jado STG 5-i Instrucciones De Manejo página 59

Program grilling steps
Select table on the display contains 2 columns:
• duration
• temperature
Row 1 displays grilling step 1, row 2 grilling step 2, etc.
The maximum number of steps is 9.
The orange frame in a cell indicates that this cell has
been selected. For editing the cell, access it by se-
lecting the cell and then press OK.
Set duration
1. Select the duration of the first grilling step.
This is the value in the left upper part of the table.
2. Press OK to access the cell. The background of the
cell now turns orange.
3. Set the duration of the step (1-240 minutes) using
the turning knob.
4. Select – to skip the step
5. Press OK to close the cell and save the setting.
The first grilling step can be set as pre-heating step. To do this skip the setting of the time. If you
then set the temperature the duration will automatically be set on 'PRE'. This setting is only pos-
sible when the general pre-heating settings made in the manager menu are on 'yes'.
Set the grilling temperature
6. Select the right-hand cell of the same grilling step using the arrow to the right.
7. Press OK.
8. Set the grilling temperature using the turning knob.
9. Press OK to close the cell and save the setting.
10. Select the left-hand cell of the next grilling step and repeat steps 2 – 9 to add another grilling step.
Steps 2 - 9 can be set as steps for keeping warm. However, a heating step is only performed
when this is the last step of the program.
The heating step has an infinite duration and keeps the grill and the products it contains at the
set temperature.
Set the duration of the step concerned to HOLD by going back further than –.
Save the programme
1. Select 'save program'.
2. Press OK.
WWW.FRIJADO.COM 2-EN-25
STG 5 / 7 / 8- I
9123494 - 4/ 2009