Cleaning; Assemble - Fri-Jado STG 5-i Instrucciones De Manejo

• Ensure the unit's accessibility for maintenance and service activities.
• The opening between the unit and the table surface must be free from obstacles to ensure good ventilation
in the electrical compartment.
• The products in the unit must be clearly visible.
• Do not allow children within reach of the operator side.
• The environmental temperature must be between 10 and 30 °C. The unit is not suitable for outside use.
• There should be at least 100 mm (4 inch) clearance between the unit and any walls at the sides or back.
• The unit is not suitable for use in a rainy or damp environment.
• There has to be a wall socket nearby. The wall socket has to comply with the technical specifications of the
unit.
3.3.

Cleaning

WARNING
Slide the grease tray completely into the unit after putting it back to avoid damage to the win-
dow.
1. Clean the inside using a cleaning agent.
2. Clean the removable parts.
3. Clean the accessories.
4. Remove the soapsuds from the grease tray.
5. Remove the residual soapsuds from the inside, removable parts and accessories using a damp cloth.
6. Dry the inside, removable parts and accessories.
3.4.

Assemble

1. Place the bottom plates into the unit.
2. Place the rotor into the unit.
3. Insert the spits into the rotor discs.
WWW.FRIJADO.COM 2-EN-12
STG 5 / 7 / 8 - I
9123494 - 4/2009