ECOFOREST ecoGEO Serie Manual De Instalador página 50

Figure 1.20. Example of digital input connections with 24Vac / 24Vdc voltage.
Analogue outputs (AOxx)
These terminals send analogue 0-10Vdc regulation signals to modulate the control of outlet units with mixture, aerothermal brine
units with variable speed fan, external auxiliary boilers, etc. On the other hand, these connectors have a 24Vac power supply
terminal to supply the modulating valve motor.
Figure 1.21. Example of 0-10Vdc modulating regulation signal connections.
Digital outputs to relay (DOxx)
These terminals provide 230Vac activation signals for various external components, such as outlet units, open / close 3-way valves,
external auxiliary equipment, etc. The connectors used for valve control allow connection of any type of 2 or 3-point control valve,
as long as it has a single-phase 230Vac power supply.

Pay special attention to the maximum consumption allowed by each connector. Use an intermediate
relay for the connection, if necessary.
NOTE
A)
B)
Figure 1.22. Example of digital outputs to relay for A) circulator pumps and B) open / close 3-way valves.
24Vac
Com
Sgn
24Vdc
Com
Sgn
GND
24V
ac
Vout
PE
N
L
PE
N
Lin
Loff
Lon
50
Installer manual ecoGEO