Assembly And Disassembly Of The Covers - ECOFOREST ecoGEO Serie Manual De Instalador

Figure 1.3. Removing the screws fastening the heat pump to the pallet.

2.4. Assembly and disassembly of the covers

A Torx T20 screwdriver and a 10 mm wrench are needed to assemble and disassemble the covers.
ecoGEO Compact Models
1. Disassemble the top front cover. Remove the screws located at the upper part and pull the cover upwards.
2. Disassemble the bottom front cover. Remove the screws located at the upper part and pull upwards.
3. Disassemble the side covers. Loosen the screws and nuts located at the front and rear and remove the cover.
4. Once the covers have been removed, the acoustic insulation panels can be removed by pulling them outwards.
ecoGEO Basic Models
1. Disassemble the top cover. Remove the screws located at the rear and pull the cover upwards.
2. Disassemble the front cover. Remove the screws located at the upper part and pull the cover upwards.
3. Disassemble the side covers. Loosen the screws and nuts located at the front and rear and top and remove the cover.
4. Once the covers have been removed, the acoustic insulation panels can be removed by pulling them outwards.
Figure 1.4. Disassembly of the covers of the ecoGEO Compact models.
36
Installer manual ecoGEO