Unpacking - ECOFOREST ecoGEO Serie Manual De Instalador

538
463
348
273
157
82
11
12
10
Figure 1.2. Overall dimensions and hydraulic connections of the ecoGEO Basic model (Amounts in mm).
No.
1 Heating / cooling supply; G1-1/4" Male
2 Heating / cooling return; G1-1/4" Male
3 Brine supply; G1-1/4" Male
4 Brine return, G1-1/4 Male
5 DHW exchanger intake; G1" Male
6 DHW exchanger return; G1" Male
All the models are prepared for pipe connection both at the top and at the rear.
The factory installation is prepared for connection at the top. To connect at the rear, the connection fittings installed at the top
must be exchanged with the blind cable glands installed at the rear.

2.3. Unpacking

To unpack the heat pump, remove the wooden box carefully, remove the pallet anchoring screws and perform a check to make
sure the heat pump has not been damaged during transportation.
600
Description
Table 1.1. Hydraulic connections key.
1 2 3 4
No.
7 Tap water inlet; G1" Female
8 DHW outlet (G1" Female)
9 DHW recirculation return; G3/4" Female
10 Drain; φ16 mm
11 Power cables inlet
12 Control cables inlet
35
Installer manual ecoGEO
5 6
Description