Special Tools - Yamaha WR400F 1999 Manual De Servicio

EC140001

SPECIAL TOOLS

The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised
techniques. The shape and part number used for the special tool differ by country, so two types are
provided. Refer to the list provided to avoid errors when placing an order.
NOTE:
For U.S.A. and Canada, use part number starting with "YM-" or "YU-".
For others, use part number starting with "90890-".
Part number
YU-01135-A, 90890-01135
YM-01305, 90890-01305
YU-01235, 90890-01235
YU-03097, 90890-01252
YU-01256
YU-90050, 90890-01274
YU-90050, 90890-01275
YU-91044, 90890-04081
YU-90062, 90890-01277
YU-01304, 90890-01304
YU-24460-1, 90890-01325
YU-33984, 90890-01352
YU-33270, 90890-01362
Tool name/How to use
Crankcase separating tool
Crankcase separating bolt
These tools are used to split the crankcase as well as
remove the crankshaft from either case.
Rotor holding tool
This tool is used when loosening or tightening the fly-
wheel magneto securing nut.
Dial gauge and stand
Stand
These tools are used to check each part for runout or
bend.
Crankcase installing tool
Pot
Bolt
Spacer
Adapter
These tools are used to install the crankshaft.
Piston pin puller
This tool is used to remove the piston pin.
Radiator cap tester
Adapter
These tools are used for checking the cooling sys-
tem.
Flywheel puller
This tool is used to remove the flywheel magneto.
SPECIAL TOOLS
YU-01135-A
YM-01305
YU-01235
YU-03097
YU-01256
YU-90050
YU-90062
YU-91044
YU-01304
YU-24460-01
YU-33984
YM-33270
1 - 6
GEN
INFO
Illustration
90890-01135
90890-01305
90890-01235
90890-01252
90890-01274
90890-01275
90890-01277
90890-04081
90890-01304
90890-01325
90890-01352
90890-01362